Fasteners
Here you will find fastening materials for attaching the handle to the tongs/nakago.
Corby bolt (Corby Style Bolt) - Brass - 5mm x 4mmCorby Style Bolts of brass.
for attaching a handle / shell part to the blade.
Dimensions:
Total length (fully screwed together): 23.4 mm (maximum 26.5 mm)
Length of the schaft part: 15.6 mm
Length of threaded part: 12.60…€ 1,99
Corby bolt (Corby Style Bolt) - Brass - 4mm x 3mmCorby Style Bolts of brass,
for attaching a handle / shell part to the blade.
Dimensions:
Total length (fully screwed together): 23.2 mm (maximum 26.5 mm)
Length of the shaft part: 15.5 mm
Length of threaded part: 12.60…€ 1,99
Corby bolt (Corby Style Bolt) -RVS- 5mm x 4mmCorby Style Bolts made of rust-resistant steel
for attaching a handle / shell part to the blade.
Dimensions:
Total length (fully screwed together): 23.4 mm (maximum 26.5 mm)
Length of the schaft part: 15.6 mm
Length of threaded…€ 1,99
Corby bolt (Corby Style Bolt) -RVS- 4mm x 3mmCorby Style Bolts made of rust-resistant steel
for attaching a handle / shell part to the blade.
Dimensions:
Total length (fully screwed together): 23.2 mm (maximum 26.5 mm)
Length of the shaft part: 15.5 mm
Length of threaded…€ 1,69
Three-piece fastening set - brass + brass3-piece set with brass connector and 2 brass screws for hexagon socket (hexagonal)
for attaching a handle / shell part to the blade.
This set consists of 2 screws with conical edge and hexagonal hole for hex key and a brass…€ 1,99-25%
Kagemitsu Three-piece fastening set - brass + brass3-piece mounting pin with brass connector and 2 brass screws for Allen (hexagonal)
for attaching a handle/shell part to the blade.
This set consists of 2 screws with conical edge and hexagonal hole for Allen key and a brass…€ 1,99 € 1,49
Step drill for corby bolt 7mm x 5mmStep drill for attaching scales to a knife handle using a corby bolt.
∙ Total length: 73.1 mm (L)
∙ Drill length: 33.5 mm (I)
∙ Drill length: 7.45 mm (I2)
∙ Diameter: 6.85 mm (Dh8)
∙ Diameter: 5.1 mm (dh10)
Only…€ 17,95- Step drill for corby bolt 6mm x 5mm
Step drill for drilling a hole for a corby bolt.
∙ Total length: 100 mm (L)
∙ Drill length: 65 mm (I)
∙ Drill length: 20 mm (I2)
∙ Diameter: 6 mm (Dh8)
∙ Diameter: 5 mm (dh10)
Only suitable for wood and plastic/resin€ 17,95 
Step drill for corby bolt 5mm x 4.1mmStep drill for attaching scales to a knife handle using a corby bolt.
∙ Total length: 84.0 mm (L)
∙ Drill length: 49.1 mm (I)
∙ Drill length: 10.05 mm (I2)
∙ Diameter: 5.05 mm (Dh8)
∙ Diameter: 4.1 mm (dh10)
Only…€ 16,95
Step drill for corby bolt 4mm x 3.1mmStep drill for attaching scales to a knife handle using a corby bolt.
∙ Total length: 72.1 mm (L)
∙ Drill length: 31.8 mm (I)
∙ Drill length: 9.55 mm (I2)
∙ Diameter: 4.05 mm (Dh8)
∙ Diameter: 3.1 mm (dh10)
Only…€ 15,95- Kagemitsu Corby Style Bolt -Stainless steel- 4mm x 3mm
Corby Style Bolts of rust resistant steel
for attaching a handle/shell part to the blade.
Dimensions:
∙ Total length (fully screwed together): 25.1 mm (maximum 27.3 mm)
∙ Shaft length: 17 mm
∙ Threaded part length: 12…€ 1,39 
Kagemitsu Corby Style Bolt -Stainless steel- 7mm x 5mmCorby Style Bolts of rust resistant steel
for attaching a handle/shell part to the blade.
Dimensions:
∙ Total length (fully screwed together): 25 mm (maximum 28.5 mm)
∙ Shaft length: 17 mm
∙ Thread Part Length: 14mm
∙…€ 1,99- Kagemitsu Corby Style Bolt -Stainless steel- 6mm x 5mm
Corby Style Bolts of rust resistant steel
for attaching a handle/shell part to the blade.
Dimensions:
∙ Total length (fully screwed together): 25 mm (maximum 28.5 mm)
∙ Shaft length: 17 mm
∙ Thread Part Length: 14mm
∙…€ 1,89 - Kagemitsu Corby Style Bolt -Stainless steel- 5mm x 4mm
Corby Style Bolts of rust resistant steel
for attaching a handle/shell part to the blade.
Dimensions:
∙ Total length (fully screwed together): 25 mm (maximum 28 mm)
∙ Shaft length: 17 mm
∙ Thread Part Length: 14mm
∙…€ 1,69 
10x mixing tips for the 2-component epoxy gluebag with 10x mixing tips for the 2-component epoxy glue (2003 and 2005)
€ 3,95
Brass rod, round profile- 50cm 3-8 mm diameterRound staff (solid) made of brass.
for attaching a handle/shell part to the blade.
Dimensions:
∙ Total length, 50 cm
∙ Diameter: various (3-8mm)
∙ Brass, or brass, is an alloy of copper (55-70%) and zinc (45-30%).
The…€ 2,50-33%
2- component Epoxyglue -50ml- (5 minutes)2-component Epoxy adhesive in very handy syringe with 2 separate mixing syringes.
Ideal for attaching handle material or securing a Nakago in a traditional Japanese handle.
DESCRIPTION
A fast-curing, universal epoxy.
Curing…€ 14,95 € 9,95-33%
2- component Epoxyglue -50ml- (30 minutes)2-component Epoxy adhesive in very handy syringe with 2 separate mixing syringes.
Ideal for attaching handle material to the pliers or securing a Nakago in a traditional Japanese handle.
DESCRIPTION
∙ A fast-curing, universal…€ 14,95 € 9,95
Glue gun for 2-component Epoxy glueThis device is suitable for our two component epoxy glue. The mixing ratio is 50 to 50.
€ 15,95
